China manufacturer oxygen devices automatic oxygen generator
Adopts the current world's advanced transformation absorption (PSA) principle.
It separate and filter the oxygen and nitrogen under common temperature and pressure,
then obtain the medical oxygen.
It is consistent with the pharmaceutical industry standards.
Pure physical manner of making oxygen, without any additives, no disposables, pollution-free, fresh and natural.
Technical indicators
Oxygen concentration(when the flow≤1 liter) 90 ± 3% (v / v)
Carbon dioxide content ≤0.01% (v / v)
Smell Odorless
Particle size of solid matter ≤10um
Solid matter content ≤0.5mg / m 3
Product technical indicators:
Adjustment range (1 ~ 7 L / min)
Running noise ≤60dB (A)
Timer error ≤ ± 3%
Input power 150W
Machine weight about 6kg
Outline size 390 × 270 × 200 mm
Table 1 Failure analysis and troubleshooting example table
Product Features
The MSLZY30 household oxygen generator is one of the series of products produced by our company. The product uses molecular sieve as the adsorbent, uses the advanced pressure swing adsorption (PSA) principle, and uses air as the raw material to produce oxygen through physical means. The following features:
1) The air is taken from nature.
2) Adopt advanced pressure swing adsorption technology (PSA), advanced process flow and low energy consumption.
3) The product has a novel shape design, simple operation, stable operation and convenient maintenance.
Adopts the current world's advanced transformation absorption (PSA) principle.
It separate and filter the oxygen and nitrogen under common temperature and pressure,
then obtain the medical oxygen.
It is consistent with the pharmaceutical industry standards.
Pure physical manner of making oxygen, without any additives, no disposables, pollution-free, fresh and natural.
Technical indicators
Oxygen concentration(when the flow≤1 liter) 90 ± 3% (v / v)
Carbon dioxide content ≤0.01% (v / v)
Smell Odorless
Particle size of solid matter ≤10um
Solid matter content ≤0.5mg / m 3
Product technical indicators:
Adjustment range (1 ~ 7 L / min)
Running noise ≤60dB (A)
Timer error ≤ ± 3%
Input power 150W
Machine weight about 6kg
Outline size 390 × 270 × 200 mm
Table 1 Failure analysis and troubleshooting example table
| Failure phenomenon | Cause Analysis | Method of exclusion |
| When turned on, the oxygen generator does not work and the display does not light up. | 1. Is the power on? 2. Is the fuse blown? | 1. Check and tighten the power cord. 2. Replace the fuse. |
| When the oxygen generator is running, the air compressor does not rotate when it is rotated. | Unstable power supply voltage? | Configure a dedicated voltage regulator. |
| The oxygen generator is operating normally, but there is no oxygen output from the oxygen pipe. | 1. The oxygen pipe plug is not inserted properly. 2. The humidifier cup is not in place. | 1. Plug the oxygen pipe plug in. 2. Install the humidifier in place. |
| Start up works normally, no bubbles in the humidification cup. | 1. The air intake filter is blocked by dust. 2. The oxygen suction tube is dead-folded or squeezed to block the outlet pipe | 1. Clean or replace the filter. 2. Smooth out the oxygen suction tube. |
| Noisy running | 1.The oxygen generator is not placed smoothly. 2.Bottom cable tie is not loosened | 1.Place the oxygen generator smoothly. 2. Loosen the bottom cable tie |
Product Features
The MSLZY30 household oxygen generator is one of the series of products produced by our company. The product uses molecular sieve as the adsorbent, uses the advanced pressure swing adsorption (PSA) principle, and uses air as the raw material to produce oxygen through physical means. The following features:
1) The air is taken from nature.
2) Adopt advanced pressure swing adsorption technology (PSA), advanced process flow and low energy consumption.
3) The product has a novel shape design, simple operation, stable operation and convenient maintenance.