Air Handlers Air Cooled Screw Chiller Water Cooled Water Chiller
1. Eurostars water cooled commercial screw chiller main components
(1)Compressor
*Adopt world famous screw type compressor, proven quality.
*Most advanced high efficiency 5:6 asymmetric tooth type screw
*Semi-hermetic design, with less components, lower fault performance.
(2)Condenser
*Cleanable water cooled condenser is made of thread copper tubes, with the advantage of high efficiency, can be designed to be corrosion resistant and stable heat transfer.
(3)Evaporator
*Adopt dry type (DX) shell and tube evaporator, outer rolled material of the evaporator is soft thermal insulation, efficiently avoid heat transferring between evaporator and outdoor air, reduce energy consumption.
(4)Dry filter
*Dryer filter can filtrate water, acid and easy to replace.
(5)Expansion valve
*Adopt imported expansion valve, aim to adjust refrigeration flow into evaporator according to evaporating temperature, and maintain a certain pressure so as to ensure the evaporating efficiency.
(6)Controller
*Advanced microcomputer intelligent control HMI system, inbuilt Eurostars control algorithm with special design, energy efficiency and reliability is much more outstanding.
*Touch screen display design, PLC controller is optional.
3. Eurostars water cooled commercial screw chiller brief technical data
Please ask salesman for detailed complete data or visit our website:
eurostarschiller.en.made-in-china.com
eurostarschiller.en.made-in-china.com
Remarks:
(1)Rated Cooling Capacity Based on: Chilled water in/outlet temp. 12ºC/7ºC, Cooling water in/outlet temp. 30°C/35°C, Fouling factor: 0.088 sqm°C/KW.
(2) Chilled Water Range: 5~20ºC; Cooling Water Range: 20~40ºC;
4.Eurostars water cooled screw chiller working principle
Eurostars water chiller working principle is shown in the figure as below, the unit is mainly consist of compressor, condenser, evaporator, water pump, dry filter, the throttle device and protection devices, etc.
5.Protection devices in a Eurostars chiller
(1)Motor overload protection
(2)Compressor motor overheat protection
(3)Discharge temperature overhigh protection
(4)High&low pressure protection
(5)Returning water overheat protection
(6)Low water flow/level protection
(7)Phase protection
(8)Anti-freezing protection
6.Eurostars water cooled chiller series
7.Factory testing of Eurostars every chiller unit
(1)Pressurization and helium leak detection of refrigeration circuit
(2)Pressurization and leak testing of fluid circuit
(3)Chiller performance and power consumption at full load
(4)Proper operation of all controls, safety devices, and alarms
(5)Electrical tests according to standards
8. FAQ
Q: How to choose the right chiller?
A:
(1)Which place these chiller need to be installed.
(2)Cooling capacity
(3)Flow rate
(4)Inlet/outlet temperature
(5)Type of chiller (air-cooled/water-cooled)
(6)Any special requirements
Q What power supply chiller you can produce?
A: Our standard power supply is 3phase-380V-50Hz, Customized different for options, like 3phase- 220V,415V,440V,460V,480V,- 50Hz or 60Hz
Q:What refrigerant you can supply?
A: We have R22, Eco friendly R407c, R410a, R134a,R404a depends on your choice.
Q:.The chiller can heat?
A: Yes, our chiller has optional for heat recovery.
Q: What is production period ?
A: Generally speaking, it is 20-30 days,some standard model there are some stocks, but it all depend on the model, quantity.
Q: .What is your company after-sales service ?
A:Our warranty period is one year. If there is any problem in this year, we will send you the new parts for replacement. Meanwhile, welcome to consulting the technical knowledge.
Q: Chiller maintenance?
A:
Step 1: Keep Tubes Clean
Step 2: Ensure a Leak-free Unit
Step 3: Sustain Proper Water Treatment(prevent scale, corrosion)
Step 4: Analyze Oil and Refrigerant
9.Eurostars company certificates and Customer visiting
10. Our factory view
Modern new process and assemble line, including copper tube straighten machine, aluminum fin punching machine, three dimensional copper tube bending machine, tube expander machine, sheet metal laser cutting machine, numerical control punching machine, CNC bending machine, chiller, fan coil unit and AHU assemble line,. etc..
11. Eurostars water cooled chiller package and delivery
Our standard package is plastic film with wooden pallet for safe delivery and easy to load/unload.
12. Eurostars water cooled chiller projects
We exported chillers to Ukraine, New Zealand, Guatelmala, Peru, Chile, Norway, Serbia, Romania, Greece, France, South Africa, Australia, Uzbekistan, Sri Lanka, India, Saudi Arabia, Iran, Mexico, Argentina, etc..
1. Eurostars water cooled commercial screw chiller main components
(1)Compressor
*Adopt world famous screw type compressor, proven quality.
*Most advanced high efficiency 5:6 asymmetric tooth type screw
*Semi-hermetic design, with less components, lower fault performance.
(2)Condenser
*Cleanable water cooled condenser is made of thread copper tubes, with the advantage of high efficiency, can be designed to be corrosion resistant and stable heat transfer.
(3)Evaporator
*Adopt dry type (DX) shell and tube evaporator, outer rolled material of the evaporator is soft thermal insulation, efficiently avoid heat transferring between evaporator and outdoor air, reduce energy consumption.
(4)Dry filter
*Dryer filter can filtrate water, acid and easy to replace.
(5)Expansion valve
*Adopt imported expansion valve, aim to adjust refrigeration flow into evaporator according to evaporating temperature, and maintain a certain pressure so as to ensure the evaporating efficiency.
(6)Controller
*Advanced microcomputer intelligent control HMI system, inbuilt Eurostars control algorithm with special design, energy efficiency and reliability is much more outstanding.
*Touch screen display design, PLC controller is optional.
2. Eurostars central air conditioner system solution
3. Eurostars water cooled commercial screw chiller brief technical data
Please ask salesman for detailed complete data or visit our website:
eurostarschiller.en.made-in-china.com
eurostarschiller.en.made-in-china.com
Water Cooled Chiller Unit(R407C) | ||||||||||||
Model ESGW ~ | 031SON | 041SON | 055SON | 067SON | 075SON | 089SON | 101SON | 108SON | 121SON | 141SON | ||
Rated Cooling Capacity | KW | 96 | 129 | 166 | 227 | 248 | 293 | 339 | 400 | 473 | 500 | |
USRT | 27.3 | 36.7 | 47.2 | 64.6 | 70.5 | 83.3 | 96.4 | 113.8 | 134.5 | 142.2 | ||
×1000kcal/h | 82.6 | 110.9 | 142.8 | 195.2 | 213.3 | 252.0 | 291.5 | 344.0 | 406.8 | 430.0 |
Water Cooled Chiller Unit(R407C) | ||||||||||||
Model ESGW ~ | 162SON | 175SON | 183SON | 208SON | 230SON | 234SON | 278SON | 297SON | 392SON | 443SON | ||
Rated Cooling Capacity | KW | 553 | 589 | 616 | 717 | 787 | 845 | 943 | 1074 | 1394 | 1587 | |
USRT | 157.3 | 167.5 | 175.2 | 203.9 | 223.8 | 240.3 | 268.2 | 305.5 | 396.5 | 451.4 | ||
×1000kcal/h | 475.6 | 506.5 | 529.8 | 616.6 | 676.8 | 726.7 | 811.0 | 923.6 | 1198.8 | 1364.8 |
Water Cooled Chiller Unit(R407C) | ||||||||||||
Model ESGW ~ | 062DON | 082DON | 110DON | 134DON | 150DON | 178DON | 202DON | 242DON | 282DON | 304DON | ||
Rated Cooling Capacity | KW | 193 | 257 | 332 | 454 | 495 | 587 | 678 | 800 | 946 | 999 | |
USRT | 54.9 | 73.1 | 94.4 | 129.1 | 140.8 | 167.0 | 192.8 | 227.5 | 269.1 | 284.1 | ||
×1000kcal/h | 166.0 | 221.0 | 285.5 | 390.4 | 425.7 | 504.8 | 583.1 | 688.0 | 813.6 | 859.1 |
Water Cooled Chiller Unit(R407C) | ||||||||||||
Model ESGW ~ | 324DON | 350DON | 366DON | 416DON | 460DON | 468DON | 556DON | 594DON | 784DON | 886DON | ||
Rated Cooling Capacity | KW | 1105 | 1178 | 1232 | 1433 | 1574 | 1689 | 1885 | 2148 | 2788 | 3174 | |
USRT | 314.3 | 335.0 | 350.4 | 407.6 | 447.7 | 480.4 | 536.1 | 610.9 | 792.9 | 902.7 | ||
×1000kcal/h | 950.3 | 1013.1 | 1059.5 | 1232.4 | 1353.6 | 1452.5 | 1621.1 | 1847.3 | 2397.7 | 2729.6 |
(1)Rated Cooling Capacity Based on: Chilled water in/outlet temp. 12ºC/7ºC, Cooling water in/outlet temp. 30°C/35°C, Fouling factor: 0.088 sqm°C/KW.
(2) Chilled Water Range: 5~20ºC; Cooling Water Range: 20~40ºC;
4.Eurostars water cooled screw chiller working principle
Eurostars water chiller working principle is shown in the figure as below, the unit is mainly consist of compressor, condenser, evaporator, water pump, dry filter, the throttle device and protection devices, etc.
(1)Compressor | (2)Water cooled condenser | (3)Cooling tower |
(4)Dry filter | (5)Solenoid valve | (6)Expansion valve |
(7)Evaporator | (8)High,Low pressure control | (9)High pressure control |
(10)High pressure gauge | (11)Low pressure gauge | (12)Level sensor |
(13)Water tank | (14)Water supply | (15)Water pump |
(16)Water pressure gauge | (17)Temperature controller | (18)Bypass line |
(19)Water inlet | (20)Water outlet | (21)Water drain |
5.Protection devices in a Eurostars chiller
(1)Motor overload protection
(2)Compressor motor overheat protection
(3)Discharge temperature overhigh protection
(4)High&low pressure protection
(5)Returning water overheat protection
(6)Low water flow/level protection
(7)Phase protection
(8)Anti-freezing protection
6.Eurostars water cooled chiller series
Water cooled screw chiller(with dual compressors,dual condenser) |
Water cooled screw chiller(with single compressor, single condenser) |
Water cooled screw chiller(with flooded evaporator) |
Water cooled screw chiller with heat recovery |
Water cooled heat pump chiller |
Water cooled heat pump chiller with heat recovery |
Water cooled flooded screw chiller with heat recovery |
Water cooled flooded heat pump chiller |
Water cooled centrifugal water chiller |
7.Factory testing of Eurostars every chiller unit
(1)Pressurization and helium leak detection of refrigeration circuit
(2)Pressurization and leak testing of fluid circuit
(3)Chiller performance and power consumption at full load
(4)Proper operation of all controls, safety devices, and alarms
(5)Electrical tests according to standards
8. FAQ
Q: How to choose the right chiller?
A:
(1)Which place these chiller need to be installed.
(2)Cooling capacity
(3)Flow rate
(4)Inlet/outlet temperature
(5)Type of chiller (air-cooled/water-cooled)
(6)Any special requirements
Q What power supply chiller you can produce?
A: Our standard power supply is 3phase-380V-50Hz, Customized different for options, like 3phase- 220V,415V,440V,460V,480V,- 50Hz or 60Hz
Q:What refrigerant you can supply?
A: We have R22, Eco friendly R407c, R410a, R134a,R404a depends on your choice.
Q:.The chiller can heat?
A: Yes, our chiller has optional for heat recovery.
Q: What is production period ?
A: Generally speaking, it is 20-30 days,some standard model there are some stocks, but it all depend on the model, quantity.
Q: .What is your company after-sales service ?
A:Our warranty period is one year. If there is any problem in this year, we will send you the new parts for replacement. Meanwhile, welcome to consulting the technical knowledge.
Q: Chiller maintenance?
A:
Step 1: Keep Tubes Clean
Step 2: Ensure a Leak-free Unit
Step 3: Sustain Proper Water Treatment(prevent scale, corrosion)
Step 4: Analyze Oil and Refrigerant
9.Eurostars company certificates and Customer visiting
10. Our factory view
Modern new process and assemble line, including copper tube straighten machine, aluminum fin punching machine, three dimensional copper tube bending machine, tube expander machine, sheet metal laser cutting machine, numerical control punching machine, CNC bending machine, chiller, fan coil unit and AHU assemble line,. etc..
11. Eurostars water cooled chiller package and delivery
Our standard package is plastic film with wooden pallet for safe delivery and easy to load/unload.
12. Eurostars water cooled chiller projects
We exported chillers to Ukraine, New Zealand, Guatelmala, Peru, Chile, Norway, Serbia, Romania, Greece, France, South Africa, Australia, Uzbekistan, Sri Lanka, India, Saudi Arabia, Iran, Mexico, Argentina, etc..